Engineered Material Systems to Showcase CA-150 Series Conductive Adhesives for Next-Generation Solar Modules at the SNEC PV Power Expo
Engineered Material Systems, Inc. (EMS), a leading global supplier of conductive interconnect materials for photovoltaic applications, announces the introduction of its new CA-150 Series Snap Cure, Low Cost Conductive Adhesive for stringing and shingling crystalline silicon and Heterojunction solar modules. The new conductive adhesive will be displayed in Hall W3, booths 806/807 at the SNEC PV Power Expo, scheduled to take place April 19-21, 2017 in Shanghai, China.
The EMS CA-150 series is designed for use in modified ribbon stringers. The material will snap cure and fixture cells and ribbons in seconds at 150°C with enough strength to withstand module manufacturing processes until the adhesive cure is completed during the encapsulant lamination process. EMS CA-150 series conductive adhesives can be dispensed by time-pressure, auger or jetting. The adhesive is more stress absorbing than solder to withstand the rigors of thermal cycling and processes at lower temperatures than solder. CA-150 series conductive adhesives are only half the cost of pure silver-filled conductive adhesives. For more information about EMS’ low cost conductive adhesives or to learn how the company can define, develop and create an engineered material solution that is right for your company, visit our tabletop display at the conference or visit www.emsadhesives.com.